• Goff's Curtain Walls

Improving Profitability Through Flexible Space Separation

800-763-1538

Goff’s Enterprises High Performance Doors

G2 Doors

Designed for interior and exterior high cycle traffic, up to 16′ x 16′ openings

Mesh Doors

Vinyl Doors

Model G2 5400 has a direct drive motor with a VFD for soft start and stop feature. This door moves at 54″ per second (up and down) and is available up to a 15′ w x 16’h door opening size. This door is designed to handle up to 200 cycles per hour in a single phase operator.

Model G2 Harsh Guard has a direct drive motor and is IP-65 (wash down rated). This door moves at 28″ per second (up and down) and is available up to a 16′ w x 16’h door opening size. This door is designed to handle up to 40 cycles per hour in a single phase operator and 120 cycles per hour in a three phase operator.

Model G2 3600 has a jack shaft operator. This door moves at 36″ per second (up and down) and is available up to a 16′ w x 16’h door opening size. This door is designed to handle up to 160 cycles per hour in a single phase operator .

Model G2 2800 has a direct drive motor. This door moves at 28″ per second (up and down) and is available up to a 16′ w x 16’h door opening size. This door is designed to handle up to 70 cycles per hour in single phase operator and 120 cycles per hour in a three phase operator.

The Goff’s G2 Chain Hoist is designed for light duty use in applications where occasional manual operation is adequate. This door is available up to a 16′ w x 16’h door opening size.

G2 Lite Doors

Designed for interior and low cycle exterior dock door openings up to 12’x12′

Mesh Doors

Vinyl Doors

Model G2 Lite 3000 has a jack shaft operator. This door moves at 30″ per second (up and down) and is available up to a 12′ w x 12’h door opening size. This door is designed to handle up to 160 cycles per hour in a single phase operator.

Model G2 Lite 2800 has a direct drive motor. This door moves at 28″ per second (up and down) and is available up to a 12′ w x 12’h door opening size. This door is designed to handle up to 70 cycles per hour in single phase operator and 120 cycles per hour in a three phase operator.

Model G2 Lite 1800 has an in-tube motor. This door moves at 18″ per second (up and down) and is available up to a 12′ w x 12’h door opening size. This door is designed to handle up to 24 cycles per hour in a single phase operator.

The Goff’s G2 Lite Chain Hoist is designed for light duty use in applications where occasional manual operation is adequate. This door is available up to a 12′ w x 12’h door opening size.

The Goff’s G2 Lite Spring Assist is designed for light duty use in applications where occasional manual operation is adequate. This door is available up to a 12′ w x 12′ h door opening size

  • member
  • Member Company
  • ida
  • isa
  • vistage
  • ica
  • trucks
  • tax deduction
  • tax deduction